![FLIR X-Series Cameras | Cooled Thermal Science Cameras](https://www.thermalvisionresearch.co.uk/wp-content/uploads/2023/06/Screenshot-2023-06-17-at-12.58.39-1.png)
Teledyne FLIR
X-Series Research Sensors MWIR and LW Science-Grade Camera
The entire line of FLIR X-Series cameras, offers advanced recording, triggering, and synchronization capabilities, making it easy to configure and integrate for successful acquisitions in the most demanding applications. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X-series will provide higher quality recordings, save time, and mitigate frustration in dynamic acquisition environments. Plus, by combining razor sharp resolution with high-speed frame rates, this camera allows researchers to capture detailed imagery of the scene and stop motion high-speed events—whether in the lab or on the test range.
![](https://www.thermalvisionresearch.co.uk/wp-content/uploads/2023/06/Screenshot-2023-06-17-at-14.05.18.png)
![](https://www.thermalvisionresearch.co.uk/wp-content/uploads/2023/06/Screenshot-2021-07-11-at-14.37.58-e1687017788245.webp)
KEY Features
Spectral Ranges from
- 1.5um to 5um for broadband – BB
- 3um to 5um for Narrow Band – NB
- 7umto 12um for Longwave – LW
Spatial Resolutions from
- 640 x 512
- 1280 x 1020
Framerates from
- 180Hz full frame at 1280 by 1020
- 1000Hzs full frame at 640 by 512
- 29000kHz sub-window mode with X6980 ( BB NB and LW )
29420-200 FLIR X6800sc InSb (1.5 – 5.0µm), 640×512, f/2.5, 502Hz
29420-201 FLIR X6801sc InSb (3.0 – 5.0µm), 640×512, f/2.5, 502Hz
29420-202 FLIR X6802sc InSb (1.5 – 5.0µm), 640×512, f/4.1, 502Hz
29420-203 FLIR X6803sc InSb (3.0 – 5.0µm), 640×512, f/4.1, 502Hz
X6980 Series
29267-280 FLIR X6980 InSb (1.5 – 5.0µm), 640×512, f/2.5, 1004Hz
29267-281 FLIR X6981 InSb (3.0 – 5.0µm), 640×512, f/2.5, 1004Hz
29267-282 FLIR X6982 InSb (1.5 – 5.0µm), 640×512, f/4.1, 1004Hz
29267-283 FLIR X6983 InSb (3.0 – 5.0µm), 640×512, f/4.1, 1004Hz
X8580 Series
29422-280 FLIR X8580 InSb (1.5 – 5.0µm), 1280×1024, f/2.5, 181Hz
29422-281 FLIR X8581 InSb (3.0 – 5.0µm), 1280×1024, f/2.5, 181Hz
29422-282 FLIR X8582 InSb (1.5 – 5.0µm), 1280×1024, f/4.1, 181Hz
29422-283 FLIR X8583 InSb (3.0 – 5.0µm), 1280×1024, f/4.1, 181Hz
![High Resolution Thermal Imaging Camera](https://www.thermalvisionresearch.co.uk/wp-content/uploads/2023/06/Screenshot-2023-06-17-at-14.41.44.png)
![High Resolution Thermal Imaging](https://www.thermalvisionresearch.co.uk/wp-content/uploads/2023/06/Screenshot-2023-06-17-at-14.41.51.png)
KEY APPLICATIONS
HIGH RESOLUTION THERMAL IMAGING
PCB TESTING
NON-DESTRUCTIVE TESTING
TARGET SIGNATURE
RADIOMETRY
STRESS MAPPING
![](https://www.thermalvisionresearch.co.uk/wp-content/uploads/2023/06/100mm-motorized-lens_cropped.png)
MOTORIZED LENSES
The next generation of X-Series cameras is compatible with FLIR motorized lenses for precise, remote focus adjustments.
![](https://www.thermalvisionresearch.co.uk/wp-content/uploads/2023/06/x6980-x8580-frs.jpg)
LONG-DURATION RECORDINGS
Record directly to the on-board, hot-swappable 512 GB SSD for up to 15 minutes at high frame rates and full resolution—no need for extra equipment.
![](https://www.thermalvisionresearch.co.uk/wp-content/uploads/2023/06/frs-small.jpg)
FASTER DOWNLOADS
Fast data downloads from the SSD over any of the digital data buses for advanced analysis with FLIR Research Studio software.
![](https://www.thermalvisionresearch.co.uk/wp-content/uploads/2023/06/Screenshot-2023-06-17-at-14.25.51.png)
![](https://www.thermalvisionresearch.co.uk/wp-content/uploads/2023/06/Screenshot-2023-06-17-at-15.00.59.png)
HIGH RESOLUTION, HIGH SENSITIVITY
Acquire crisp thermal images, even at high speeds
- Detect minute temperature differences with very low noise
- Capture full 1280 × 1024 pixel resolution data at up to 181 Hz or up to 6,000 Hz in subwindow mode
- Ensure crisp images by remotely focusing the camera using FLIR motorized lenses
- Stream high-speed 14-bit data simultaneously over Gigabit Ethernet, Camera Link, and CoaXPress®
ON-CAMERA RAM/SSD RECORDING
Record critical thermal data directly to on-camera memory
- Save up to 34 seconds of full HD resolution data to on-camera RAM with zero dropped frames
- Record up to 15 minutes of 1280 × 1024 resolution data at 181 Hz direct to the included 512 GB SSD
- Remotely playback and transfer recorded data directly from the SSD over GigE, Camera Link, or CXP
- Rapidly remove sensitive data from the camera with hot-swappable SSD
MULTIPLE SOFTWARE INTERFACES
View, record, analyze and share important thermal data
- Stream thermal data directly to a computer running Windows®, MacOS®, or Linux®
- Make critical decisions quickly using FLIR Research Studio’s advanced analysis capabilities
- Integrate camera functionality and recording in third-party software via the FLIR Science Camera SDK
- Collaborate with colleagues by enabling local analysis of shared data with FLIR’s free Research Studio Player
ADVANCED FILTERING OPTIONS
Maximize camera imagery to meet specific requirements
- Quickly switch between different filters using the easy access, four-position motorized filter wheel
- Easily install/remove spectral or neutral density filters in the field for optimal camera flexibility
- Ensure the correct filters and calibration association with automatic filter recognition
- Optimize the camera system for unique applications with custom cold filter options
SYNCHRONIZATION AND TRIGGERING
Capture essential imagery by synchronizing with external events or instrumentation
- Initialize on-camera data recordings using an external record trigger or specific IRIG-B time
- ontrol precisely when an image frame is generated or synchronize it to other equipment
- Align image capture times with other data using TSPI-accurate IRIG-B time stamping